FIFINE AMPLIGAME D6 Stand

Search models, users, collections, and posts

ScoutMasterKevin

Household>Office

IP Report

Print Profile(2)

All

X2D

H2S

H2D

H2C

P2S

H2D Pro

A2L

P1S

X1E

A1 mini

X1 Carbon

P1P

0.2mm layer, 2 walls, 10% infill

Designer

1.3 h

1 plate

5.0(21)

P1S, Fuzzy Skin, 0.2mm layer, 2 walls, 15% infill

3.2 h

1 plate

5.0(5)

Open in Bambu Studio

Boost

153

442

311

Released

Bill of Materials

Bambu Filaments

Select all

PLA Basic

Description

Boost Me (for free)

All boosts go into helping with filament purchases for more models!

Bought the FIFINE D6 Stream Dock since the official ELGATO one was out of my budget but didn't like the angle it sat at so i went and made a stand for it.

fifine

fifine d6 stream controller

stream controller

Stand

Comment & Rating (36)

@Tj_01

Boosted

9/10 works great, just needs a hole for the light button to change the colors or to turn it off. I add anti-sliding rubber to the bottom so it stays in place Sam where it slides in.

The designer has replied

@PinkManTM

Thank you for letting me know that the RGB hole was missing , i actually added one in the cad model but i guess i forgot to upload the stl and 3mf with the hole.

(Edited)

@ziahmikael

Replying to @PinkManTM :

can you update the posted model to include that hole?

@PinkManTM

Replying to @ziahmikael :

it should be fixed now. For somereason makerworld kept resseting the 3mf back to the original one

@Ethanc51

printed in a translucent "white" pla. came out great

@tatyanacgc

I loved it. it turned out great, it's easier to handle. Thank you

Show original

@DigitalSteve

This is exactly what I needed to get my Ampligame sitting up and useful.

@ThndrCkn

Print Profile

0.2mm layer, 2 walls, 10% infill

printed great but the model doesn't have the hole for the RGB button, like in the pictures. Still works great!

The profile uploader has replied

@PinkManTM

I've replaced the .stl with the correct one, i must've uploaded the one before adding the hole that's my bad.

@Belka479

Print Profile

P1S, Fuzzy Skin, 0.2mm layer, 2 walls, 15% infill

perfectly fit

Show original

@ThatAngryViking

Print Profile

0.2mm layer, 2 walls, 10% infill

Worked great, holds my D6 perfectly

@DigitalSteve

Print Profile

0.2mm layer, 2 walls, 10% infill

The stand that should have come with the Ampligame. Printed perfectly.

@Jhartsook

Print Profile

P1S, Fuzzy Skin, 0.2mm layer, 2 walls, 15% infill

I would recommend applying some anti slip pads for the underside, others great print

@xKvmil

Print Profile

0.2mm layer, 2 walls, 10% infill

perfect

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.