Cetacean3DPrint

3c86c302e0cfc3653fd371c014b08c8.png

cover

a12e5cd3765702553976dcfdc7393f2.jpg

2de11515eec156c4f018b26f5f5322b.jpg

72b5ce8a78fc99ec6a3f1d0b7e8641f.jpg

身体A

plate_1.png

翅膀

plate_2.png

身体B+足部

plate_3.png

AMS TOP

plate_4.png

111.jpg

微信图片_20250208090936.png

此配置专为无脑患者、智障人群、自为是之人所提供的打印配置，翅膀做了Brim调参，增加了打印粘着力。由于A1、A1mini属于开放式打印平台，不适用于室内温差大、北方天气较冷的区域打印。（PS：不只是这个模型的翅膀文件，打印其他类似文件都会翘边翻车）打印出现问题要考虑下自身原因，比如打印板是否有油污、是否清洗干净、温度是否合理、使用的耗材收缩比等问题。当90%的人打印都没问题，剩下那10%的人要是还有问题，那就是人有问题，一般人有问题，我的建议是要么放弃打印，或许你真的不适合玩这个，要不就是没脑子，这类人做什么都会推卸责任，不利于生存，提早捐献器官为国家做贡献为好。如有冒犯，还望指正，谢谢！！！

This profile is specifically designed for those who lack critical thinking skills, exhibit intellectual limitations, or possess an excessively self-assured disposition, incorporating a brim adjustment to enhance bed adhesion.Given that the A1 and A1 mini utilize open-air printing platforms, they are unsuitable for environments with significant indoor temperature fluctuations, particularly those prevalent in colder northern climates.(PS: This warping issue isn't limited to this model's wings; other similar prints may also experience adhesion problems.)When encountering printing difficulties, consider self-imposed factors such as oil residue on the build plate, inadequate cleaning, suboptimal temperatures, or the employed filament's shrinkage rate.If 90% of users experience successful prints while the remaining 10% encounter issues, the problem likely stems from user error. For individuals in this category, my recommendation is to either abandon printing, as this hobby might prove unsuitable, or to address the underlying lack of critical thinking. Such individuals often deflect responsibility, hindering their ability to thrive; early organ donation to benefit society would be a commendable alternative.Should this assessment be offensive, constructive feedback is appreciated. Thank you!

(Brim) 0.2mm layer, 2 walls, 15% infill

2025-01-24_b7633f94ab939.jpg

盘1部件优化连接点，防止安装过程中造成关键断裂。

Plate 1 component optimized connection points to prevent critical breakage during installation.

Original (0.2mm layer, 2 walls, 10% infill)

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

This user content is licensed under a Standard Digital File License.

<boostme><boosttitle>为我助力</boosttitle><boostcontent>鼓励一下</boostcontent></boostme>活结大黄蜂，连接部位加强，头部分2版，一版分体（眼睛需要胶粘），一版AMS。可供玩家灵活选择。

<boostme><boosttitle>Boost Me</boosttitle><boostcontent>Give me some encouragement!</boostcontent></boostme>Living-hinge bumblebee, reinforced connection parts, two head versions, one split (eyes require glueing), one AMS. Players can choose flexibly.

Print Profile(2)

Description

Documentation (1)

Comment & Rating (14)

License