Ryobi-like Rail System for Dewalt DCF887/DCD791
Print Profile(1)
Description
The base was created by 3D scanning a Dewalt DCF887/DCD791, not sure if it will work on other models.
The magnet used is 4.5mm x 19mm x 1.6mm, and the spring is 7mm OD and 19mm long (I got it from a cosmetic bottle).
If your spring is not strong enough to hold the loaded tray in a horizontal position, you can shorten the one in the picture.
Update: 2025/02/12
Assembly picture
New suggestion: The main body should be made of ABS. I printed it with PLA, and the elastic body used for positioning has failed.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (13)