Wind-Up Walking StarWars Stormtrooper

May the 4th be with you!

Updated 20250126

Some friends gave me feedback that the stormtrooper walking was not stable because the helmet was too heavy and high, this situation did not happen when I tested it before,  but now I found it's easy to happen. So I redesigned the model, lowered its height, and changed some details, making it easy to assemble. Now that the version 3.0 is available, I kept the V2.0 models and assembly introduction, in case someone still likes the model.

______________________________________________

Updated 20250125

Initially, I wanted to design a stormtrooper's helmet that could be printed with 2 color filaments together in AMS and printed well with no support, just like most of my models did. So I designed all the overhang edges on the helmet to chamfer surfaces.

Finally, I found that the support can not be avoided, and the helmet can be tilted on the hotbed, so the chamfer surfaces are unnecessary. Then I modified the design, to keep more details of the original helmet, and uploaded the 2.0 version, as the image below shows.

______________________________________________________________________

A famous figure in Star Wars, everyone knows it.

With the “Wind-Up Walking Mechanisms” from Maker's Supply Store, you can build your own Stormtrooper Army now!

I separated the white and black parts, so there's no need to use AMS to print this model.

Assembly Introduction(V3.0): 

A wind-up cap with the Galactic Empire logo is available, you can print it individually with the print profile(0.4mm nozzle and 0.2mm nozzle)

Watch the Video for more information

My other Wind-Up family members:

Wind-Up Walking Goomba

Wind-Up Walking KIWI

Wind-Up Walking Capybara

Wind-Up Walking Ultraman & Gomora