T15 Magazine Winder for First and Second Generation Magazines - Free 3D Print Model

Search models, users, collections, and posts

SirKoubouliS

Hobby & DIY>Sport & Outdoors

IP Report

Print Profile(1)

All

X1 Carbon

P1S

P1P

X1E

A1 mini

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.2mm layer, 4 walls, 40% infill

Designer

1.3 h

1 plate

5.0(1)

Open in Bambu Studio

Boost

Released

Description

T15 Magazine Ratchet Winder

This is a Magazine Ratchet Winder for the T15 Magazine.

Helps you Wind back the Magazine Spring to Reload. Saves you about ½ the time and can be used with gloves

HardWare Used:

1, Spring 10mm Long,OD 4mm,Wire 0.5mm
2, Pan Head Screw 3.5x10mm

Alternative u can use a Spring from a pen
and a Flat Head Screw

Soon Will Be updated with more “inserts” from other Paintball Magazines

Comment & Rating (4)

@user_3183783609

Boosted

If it runs the other way around and has a thicker slot, it fits EMF magazines It works great

The designer has replied

Show original

@Johny_KoubouliS

Due to Size,i made 2 different variations One for T15s and one for Mg100 U are looking for this " Planet Eclipse Magazine Ratchet Winder for MG100 "

(Edited)

@user_3381135123

For a V2 mag for the T15, I had to drill the inner hole of the tensioner to 7.5mm and slightly chamfer the notches on the sides with a utility knife. Now it works great. Thank you very much

Show original

@sedy89

Print Profile

0.2mm layer, 4 walls, 40% infill

No more

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.