Search models, users, collections, and posts
Canyon GEAR GROOVE Garmin Mount - integrated
IP Report
Print Profile(2)
0.2mm layer, 5 walls, 20% gyroid infill, smooth PEI bed
Designer
1.7 h
1 plate
0.2mm layer, 5 walls, 20% gyroid infill
Designer
1.6 h
1 plate
Open in Bambu Studio
Boost
21
74
3
1
100
47
Released
Description
The GEAR GROOVE Garmin Mounts are sold out on the website, so I added the lock made by @Trunda_1437739 on Printables to a GEAR GROOVE model.
Included are 2 .3mf files; one in normal orientation with ironing on top level, but the upside down orientation (file called "_USD" in the end) has a better finish if used with a smooth print bed.
I printed on a BambuLab A1 Mini in normal PLA with tree supports and 5 walls, but could be printed in PETG for extra sturdiness.
You will need the screw from the top cap, and an extra at the bottom (2 x screws M6 x 12mm).
Make sure to secure your GPS with the elastic band around your steering wheel incase the print breaks during riding !!
Happy riding!!
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-Share Alike
Comment & Rating (3)