Smoking Kaeru Hueforge

Thanks for checking out my Hueforge! Please leave a like and share!

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 151.24x245mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm

Filaments Used:
    PLA BambuLab Basic Black Transmission Distance: 0.6
    PLA Chrominal Shadow Gray Transmission Distance: 3
    PLA BambuLab Matte Ash Gray Transmission Distance: 1.5
    PLA PolyLite White Transmission Distance: 5
 

This print uses 4 unique filaments

Swap Instructions:
    Start with Black
    At layer #8 (0.72mm) swap to Shadow Gray
    At layer #13 (1.12mm) swap to Ash Gray
    At layer #18 (1.52mm) swap to White for the rest.