Spawn Clown "Violator"

The Clown from Spawn! aka “Violator”. This is a thicker print.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 161.73x200mm in size
You may print at higher layer heights below the Min Depth of 2.2mm
The Max Depth is 4mm and the Actual Depth is 4.1mm

Filaments Used:
    PLA BambuLab Tough Black Transmission Distance: 0.6
    PLA BambuLab Matte Marine Blue Transmission Distance: 0.5
    PLA BambuLab Matte Beige Transmission Distance: 2
    PLA BambuLab White Transmission Distance: 10
This print uses 4 unique filaments

Swap Instructions:
    Start with Black
    At layer #33 (2.72mm) swap to Marine Blue
    At layer #43 (3.52mm) swap to Bambu Beige
    At layer #48 (3.92mm) swap to White for the rest.