Wide drip tray for Philips Baristina

news: I added Version 2! It has a reworked bottom contour on both trays so they won't wobble as much in the identation of the Baristina!

I wasn't happy with the design of the original driptray on my Philips Baristina coffee machine. 

Problem 1: If you brew a few coffees back to back the portafilter can drip a few drops of coffee next to the original driptray while grinding. 

and Problem 2: there's no good place to store the portafilter after use and i find that putting it back in the machine keeps it a little damp.

So I made a few adjustments: 

• Copied most of the original designs and dimensions but extended it to the right (symmetrically to the rest of the machine)
• my first try was to use the additional lid ( the white one on the second build plate) but it would still drip right between the 2 lids
• So I made a fitting lid for the wider tray (first build plate, blue in the pictures). 
  The holes are right under the two resting spots of the portafilter so the residual coffee drips right in and I taylored the holes after the contour of the portafilter so you can rest it in them after use as seen in the pictures. 
• I also made a slimmer tray on the second build plate which would enable the use of higher mugs but I haven't had the need to print that one yet.