Bag / backpack hanger V2 - Free 3D Print Model

Search models, users, collections, and posts

Westeros Designs

Household>Other House Models

IP Report

Print Profile(1)

All

P1S

P1P

X1 Carbon

X1E

A1 mini

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.2mm layer, 4 walls, 25% infill

Designer

1.2 h

1 plate

4.9(235)

Open in Bambu Studio

Boost

1045

3595

255

102

3.7 k

3.1 k

Released

Description

A new and improved version of my original Bag/Backpack hanger.

It's a robust 3 piece design to optimise print time and robustness. Choose filament according to the expected weight. Tested Bambu Lab Matte PLA with a weight of 10kg without any signs of breaking.

The 3 parts are guided to end up with a perfect fit and secured together with some glue

The hanger fits hanger bars up to 30mm, the bag holders are 25mm wide each.

Comment & Rating (255)

@TurboAbsurdum

Pinned by Designer

Print Profile

0.2mm layer, 4 walls, 25% infill

This thing is a beast, PETG used, a little gorilla super glue gel, and it is holding up like a boss to my very heavy backpack.

@jordan7831

Print Profile

0.2mm layer, 4 walls, 25% infill

holds my two heavy ass bags no problem

@Teddy_foux

Print Profile

0.2mm layer, 4 walls, 25% infill

perfect ! I might modify it slightly in the future for a specific print to hold headphones (there is a bit too little clearance with the bar)

@catmeowmeow

Print Profile

0.2mm layer, 4 walls, 25% infill

In my opinion best model I found for a bag hanger, doesn't take that much filament, does its job, looks great. Currently didn't even glue it. Warning if you want to glue it, don't try to assemble it, because I put it together and couldn't get it open and didn't want to force it and break it xd, tho that seems like a none issue for me personally, because it holds up great even without that step (at least with my pretty light bags) with a week worth of use taking them off and putting them back on. Did the print with bambu pla matte black.

@makermatt3D

Print Profile

0.2mm layer, 4 walls, 25% infill

Printed nice and works well! One suggestion to make it even better imo is to reduce the height of the lip slightly so it’s easier to get the bag loop over it.

@mdean0416

Print Profile

0.2mm layer, 4 walls, 25% infill

nice print and works great!

@ElC_3627395543

Print Profile

0.2mm layer, 4 walls, 25% infill

very functional, works and prints well

@m4x91

Boosted

Print Profile

0.2mm layer, 4 walls, 25% infill

parfait merci

@Cragcreation

Print Profile

0.2mm layer, 4 walls, 25% infill

Just what i needed!

@grip.print

Print Profile

0.2mm layer, 4 walls, 25% infill

printed perfectly !

(Edited)

@anzer

Print Profile

0.2mm layer, 4 walls, 25% infill

Great!

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Related Models

Wall Hook | Coat Hanger | Towel Rack

yekta

29 k

7.9 k

Backpack / Bag Hanger

fifindr

2.2 k

1.1 k

Bag Closure Clips

mail.iou

35.7 k

5.2 k

Coffee bag clip for 1kg bags

supercoolbuilds

34.7 k

4.8 k