Yarns Stand/Holder/Un-winder - Free 3D Print Model

Search models, users, collections, and posts

nvth_blake

Tools>Other Tools

IP Report

GIF

Print Profile(2)

All

P1P

P1S

X1 Carbon

X1E

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.2mm layer, 2 walls, 15% infill

Designer

9.6 h

3 plates

4.9(15)

Improved 0.2mm layer, 3 walls, 15% infill

16 h

3 plates

5.0(2)

Open in Bambu Studio

Boost

199

607

254

143

Released

Description

Great for holding yarns while knitting and crochet. Support unwinding yarns while doing color work.

You can print as many rods as necessary. Recommend 4 rods. The more rods you have the smaller yarn ball you can mount. With 4 rods, you can mount four 5-inch yarn balls.

IMPORTANT: the rod was designed to have a nut incorporated inside of it. Therefore, before printing rods, please disable support for rods, and put a pause (automatically or manually) right before printing the first ceiling layer of the nut's hole. After the printer paused, insert nuts into the hole of the rods and resume. See the last photo for more information. Feel free to message me if you are not clear.

Required Hardware: 1x 608-2RS (8mm x 22mm x 7mm) ball bearing, 1 set of 20 mm M4 nut and bolt for the wheel stopper, 1 set of 12 mm M4 nut and bolt for each rod

Please let me know if you have any questions or feedback. Thank you for checking out.