Zip Tie Cable Mount - Minimalist - Free 3D Print Model

Search models, users, collections, and posts

sparq-e

Tools>Other Tools

IP Report

Print Profile(4)

All

X1 Carbon

P1S

P1P

X1E

A1 mini

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.28mm layer, 4 walls, 80% infill

Designer

53 min

1 plate

4.9(116)

100 Pieces

Designer

3.1 h

1 plate

5.0(20)

FULL BED (339 Pieces)

Designer

10.3 h

1 plate

5.0(1)

#8 Screw Scaled Up 0.28mm layer, 4 walls, 80% infill

1 h

1 plate

5.0(7)

Open in Bambu Studio

Boost

1279

4003

192

3 k

2.2 k

Released

Description

This is a super minimalist zip-tie cable mount.

15mm x 10mm x 7mm
for flush-mount use #6 head screw (i.e. ~6.7mm diameter head)
accommodates 9mm diameter cables easily
for 25 pieces it uses only 15g of filament and takes 45 minutes to print (with Bambu PETG HF)

Even though these use minimal amount of material they have proven pretty strong - have not had any snap as I tighten zip-ties

I recommend to print in strong / weather-resistant material (like PETG, ASA, ABS) if using outdoors

The profile I've uploaded contains 25 pieces and PETG material set - you can easily duplicate this set a number of times or fill up the entire bed.

Enjoy!

Boost Me (for free)

Boost if you found this model useful!

Comment & Rating (192)

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.