Weighted Base for DUM-E (Baseplate for DUM-E)
Print Profile(1)
Description
Weighted Base for DUM-E since it was tipping over easily. A simple Baseplate to close the bottom of the base so it can be filled with something heavy. In my case i put in a machined pice of steel (60mm Diameter 15mm Height) which is kinda overkill, but anything heavy will work. Mounted through the holes allready in the model with M3x8 countersunk screws.
Also used these cable clips for the Lamp (scaled to 80%):
https://makerworld.com/en/models/575983?from=search#profileId-496521
Also check out my Print Profile on the original model called “AMS 2 Color Optimized, only 4g Flushed” if you are looking for a good 2 color print profile with almost no waste.
Boost Me (for free)
If you like my models you can gift me a free boost here :)
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (3)