Phone Cage NATO handle (M4x16 screw)
Copyright Claim
Phone Cage NATO handle (M4x16 screw)
Boost
30
51
13
Print Profile(2)
0.16mm layer, 5 walls, 15% infill
Designer
4 h
2 plates
0.16mm layer, 5 walls, 15% infill
4.6 h
2 plates
Open in Bambu Studio
Boost
30
51
13
3
110
51
Released
Description
This is a handle designed to work with my cage for phone photography or small mirrorless camera. It uses the NATO rails on the side of the cage to lock the handle. It is designed to be used with only one M4x16 or M4x20 screw. No tools required exept for something to press fit the screw into the knob (ex: small hammer). There are two versions. One with a textured grip and one with a clean grip. Can be printed in any material, but PLA is the easiest.
Comment & Rating (13)
All
Print Profile
0.16mm layer, 5 walls, 15% infill
Perfect !
The designer has replied
0
Reply
looks great 😊
0
Reply
Boosted
Print Profile
0.16mm layer, 5 walls, 15% infill
Great model! Lightly changed settings to fit the X1C & it printed quick.
Excited to find a phone holster to print!
0
Reply
Boosted
Print Profile
0.16mm layer, 5 walls, 15% infill
tightening nut works well!
0
Reply
ah here it is I know you had it somewhere . now if only you also had the phone holder part?
The designer has replied
0
Reply
phone holder is in the works! it will integrates with a new version of the cage or work with the older version. I just need a bit more time for prototyping! thanks for the support!
1
Reply
i was looking for an M4 x 20 screw to go modify as always to make it work 3d printed and i found this lol ima print it 100% rectiliniar, sideways, and use it boom https://makerworld.com/en/models/469533?from=search#profileId-378942 this is just for my test cage, nothing but a cheap smartphone by teh way hah
0
Reply
Print Profile
0.16mm layer, 5 walls, 15% infill
printed out great!
0
Reply
Print Profile
0.16mm layer, 5 walls, 15% infill
0
Reply
Print Profile
0.16mm layer, 5 walls, 15% infill
0
Reply
Print Profile
0.16mm layer, 5 walls, 15% infill
0
Reply
Print Profile
0.16mm layer, 5 walls, 15% infill
0
Reply
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-Share AlikeRelated Models
© 2024 MakerWorld