Ironing Calibration Test - Free 3D Print Model

Search models, users, collections, and posts

iLab 3D

3D Printer>Test Models

IP Report

Print Profile(2)

All

P1S

P1P

X1 Carbon

X1E

A1 mini

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

Ironing Calibration Test - 0.2mm layer

Designer

52 min

1 plate

4.9(76)

0.2mm layer, 2 walls, 15% infill

1 h

1 plate

Open in Bambu Studio

Boost

207

791

1.4 k

790

Released

Description

With this simple ironing test, easy to print, you can find the best percentage value for ironing flow to set in your slicer for perfectly smooth surfaces.

You just need to download it and start the print, then evaluate which square has the best surface and enter the corresponding value in your slicer. For Bambu Studio, the parameter to adjust is "ironing flow" in the "Quality" tab.

Ideal for both PLA and PETG.

Consider checking out my collection of essential mods for BambuLab:

https://makerworld.com/en/collections/188957

Boost Me (for free)

If you’d like to leave a boost, it would be greatly appreciated to help continue my work! Thank you for your support!

Comment & Rating (84)

@GritGraceLab

I'm new to 3D printing and this was my 2nd print on our new Bambu X1C and my 2nd try at printing this lol The 1st print, I took the description literally when it said all you had to do was import and print. When it was done I was so confused because every tile looked exactly the same. Obviously, I figured out what I was supposed to do and it came out great the 2nd time around! Thank you!

@HondaMadMatt

Hello could you elaborate on "I figured out what I was supposed to do" Thanks

@BroBirds

Replying to @HondaMadMatt :

I think he means download the .3mf from makerworld then import the file into Bambu Studio, instead of acquiring the file through bambu handy/studio.

@mvm_3design

Boosted

Print Profile

Ironing Calibration Test - 0.2mm layer

It has been very helpful since I couldn't find the correct configuration, I'm printing in PLA with 25% flow and the finish is spectacular, the only thing I had to modify is the ironing insertion, which I modified to 019 mm; THANK YOU

Show original

@user_2594373762

do you do this test for every print with pla or it is good for most pla spools

@mvm_3design

Boosted

Replying to @user_2594373762 :

I executed it but once, and it has genuinely proven sufficient for all subsequent undertakings

Show original

@MB450S

Print Profile

Ironing Calibration Test - 0.2mm layer

Perfect!

@MaciejG

Print Profile

Ironing Calibration Test - 0.2mm layer

good

@Dan_Aux

Print Profile

Ironing Calibration Test - 0.2mm layer

Great help. 25% has proven to be the favorite for several filaments. Bambu Studio defaults to 10%

(Edited)

Show original

@white_tiger_007

Print Profile

Ironing Calibration Test - 0.2mm layer

Printed well!

@arwiz

Print Profile

Ironing Calibration Test - 0.2mm layer

very good

@jcor65

Print Profile

Ironing Calibration Test - 0.2mm layer

@criscrascros

Print Profile

Ironing Calibration Test - 0.2mm layer

A good test

Show original

@muncheno

Print Profile

Ironing Calibration Test - 0.2mm layer

Printed with R3D-PETG. Flow 40% seem to be the best setting for me. Smoothest of all.

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Related Models

Ironing calibration

QD3D

24.5 k

3.9 k

complete ironing test calibration

HE3D

13.2 k

1.7 k

Ultimate IRONING Calibration Test

KIMERA Labs France

3.4 k

529

Ironing Recommended Settings Calibration Test

3DLABCS

7.2 k

2.2 k