Search models, users, collections, and posts

Rose decor

29FLO
Household>Decor
IP Report

Print Profile(6)

All
P1S
P1P
X1
X1 Carbon
X1E
A1
A1 mini
H2D
H2D Pro
H2S
P2S
H2C
X2D
A2L
[ 0.4mm nozzle ]
[ 0.4mm nozzle ]
Designer
5.5 h
1 plate
4.6(430)
A1 mini [0.4mm nozzle]
A1 mini [0.4mm nozzle]
Designer
6.5 h
1 plate
4.6(66)
A1 [ 0.4mm nozzle ]
A1 [ 0.4mm nozzle ]
Designer
6.7 h
1 plate
4.7(74)
0.1mm layer, 2 walls, 20% infill
0.1mm layer, 2 walls, 20% infill
4 h
1 plate
4.9(74)
Click to see more
Open in Bambu Studio
Boost
5931
12300
818
518
14.4 k
6.8 k
Released 

Description

Rose Decor. 

Feel free to scale it as desired. For sure you can make it bigger. If you choose a smaller size, the model will be more prone to damage. Don’t be tempted by a shorter printing time—take your time to print it properly, and you won’t have to print it twice! :)

If reducing print time is absolutely essential for you, you can simply increase the layer height. Just keep in mind that this will also reduce the level of detail.

 

Be careful when removing supports. Leafs might be fragile.

Printed with Fuzzy Skin effect.

 

Read.me:
The key to printing my figurines is having good adhesion to the build plate. I use CryoGrip Pro Frostbite for printing, which provides excellent grip, ensuring that every figurine prints successfully every time. I mainly use filaments from Bambu and have no issues with them either. If you have a different setup, make sure to focus on build plate adhesion, use high-quality dry filament and everything should be fine. Optionally, you can also add a brim to your model for extra stability.


Happy printing!

 

Boost Me (for free)

If you enjoy my work, I’d be so grateful if you showed your support by clicking "Boost." Thank you! 😊

rose
flower
decor
decoration
valentine
valentines
love
romance
statue
figure
fuzzyskin
leaf
nature
blossom
gift
home
shelf
ornament

Comment & Rating (818)

(0/1000)
@Calmec87
Print Profile
[ 0.4mm nozzle ]
I split this to limit color changes and support usage. worked great! printed in bambu sparkle, emerald green and crimson red
11
Reply
@user_1717368084
how did you split the colors?
0
Reply
@Calmec87
Replying to @user_1717368084 :
by using the split command in bambu studio, and adding connectors
0
Reply
@JonJonG
Have to be very careful of the stem when removing supports. Printed in PLA transparent, PLA black, and PETG black. All turned out well. Thank you for the model!
7
Reply
@jamessaunders
Excellent model. Printed on an X1(PLA, 0.4 mm nozzle, .1mm layer height). I separated the rose from the stem and printed in two pieces. This helped reduce support material and improved the quality of the stem. Thanks for the model! It will make for a great valentine's day gift!
5
Reply
@user_1302992128
May I ask how you separated that Mine was printed with PLA, but unfortunately it broke when removing the supports
Show original
0
Reply
@BadMaker
I have made 2 attempts and this has pretty much been the results using PLA Support material (white) and PLA Silk (bronze). The print starts out well but ends with the poop chute getting backed up and the print getting stuck. It never errored out but basically paused as pictured below. I also included my slice all view. Keep in mind this is my 4th print overall and the first that did not simply just print.
The designer has replied
1
Reply
@29flo
Use please my settings from 3MF file. You got a lot of mess there. First of all turn off support filament. You dont need it. Change support type to Tree (auto)
(Edited)
0
Reply
@BadMaker
Replying to @29flo :
Will try it again with the standard settings thank you.
0
Reply
@29flo
Replying to @BadMaker :
Use 0.4mm nozzle instead of 0.2mm. It is fine with 0.1mm layer.
0
Reply
@superdaz
Print Profile
[ 0.4mm nozzle ]
came out beautifully,if surprisingly heavy due to 100% infill. printed using eryone rose red and bambu alpine green sparkle with copy master ebony wood for the basr
4
Reply
@patje0911
Print Profile
0.1mm layer, 2 walls, 20% infill
nice print in pla+ silk Black- red&blue
(Edited)
2
Reply
@user_2495572586
Boosted
Printed with PLA Silk Gold, exquisite, a birthday gift for my wife
Show original
2
Reply
@user_715555828
Really lovely, 0.6 nozzle with 0.3 layer slanted at 45 degrees, to get extra strength in the stem and leaves
The designer has replied
0
Reply
@29flo
Oh! 0.6mm nozzle. Thats brutal :)
0
Reply
@user_715555828
Replying to @29flo :
One can still get pretty good detail even with a 6, in fact chances of using a 0.4 or 0.2 are so slim I could just as well sell the spare ones and just keep one of each
0
Reply
@Kramerika
Print Profile
0.1mm layer, 2 walls, 20% infill
just lovely.
1
Reply
@user_3714661439
Boosted
Print Profile
0.1mm layer, 2 walls, 20% infill
toller Druck
The profile uploader has replied
0
Reply
@An4lAstr0not
nice! that looks really good!
0
Reply

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Related Models

Bouquet of Roses
Bouquet of Roses
Golub17
45.5 k
12.8 k
Rose Bear
Rose Bear
Kocyns
32.5 k
8.6 k
roses with 5 types of stem ( no support )
roses with 5 types of stem ( no support )
Anko
35.3 k
14.8 k
Minimalist Roses - Floral Vase Decor
Minimalist Roses - Floral Vase Decor
CozyCraftStudios
1.5 k
787