Duplo See Saw

*Edit: I have included some variations of sizes 2x8 and 2x10 and updated the original seat model as the studs were taller, I had an issue where the studs were a little too short so they didn't grip some pieces. 

I recently designed a Duplo Swing (and one with 2 seats) for my daughter, then she asked for a see saw for her park. I was happy with the swing so I had a go designing this model. The tolerances for the base to connect to other bricks is pretty tight, if anyone has issues I can upload a file a little looser (I have included step files for anyone who wants to modify anything else).

The base requires supports but that is about all, I printed with standard 0.2mm layer height and 4 walls. Extra walls aren't required but I don't feel like it'll break very easily.

Assembly is pretty straight forward, after taking it off the build plate you press the seat part into the base and it should work as expected.