20 quartararo Lightbox

Hello,

here is my creation. A 20 quartararo lightbox.

You can use a 1 meter led strip inside.

PLEASE > remove back purge line before the print start

Please use the configuration i provide in the 3mf file.

Please set your factor K to 0.027. Go to calibration tab in bambu studio > flow dynamics > manage result at bottom > edit a value to 0.027 and name it 0.027 then save. > on the screen of your printer or in bambu studio device tab > enter factor 0.027 for ALL you filament flow k. This will avoid wisps.