Funnel for Wide Mouth Mason Jar Large Diameter

Useful funnel for the larger Wide mouth Mason jar (tempered glass jars). 

Simple print, no supports needed.

Anti Wobble : The funnel has a mid ring step to ensure it remains in place on the jar lip, while you fill your jar.

No edges inside : The funnel inside section is smooth and rounded for easy filling.

To determine your type of jar, the Wide mouth has a diameter of 3 inches (76 mm) *inside* of the glass jar neck.

Need a pouring lid ? check my models -> https://makerworld.com/en/collections/4395181

Dimensions : Top of the funnel is ⌀130mm and the jar side is about ⌀74mm to accommodate for tolerances of the different glass jars.

Printing: Must be printed the large side down with No supports. Add a brim if the 1st layer curls up. 

Shown in the pictures printed with Bambu Labs PLA basic Jade White filament.

Licence and terms of use :

This content (including the Digital File(s) is Licensed.

When you download the files, you understand and agree that this content is licensed under a Standard Digital File License.

In short, this means 

You can : 

(✔) Personal use : Download the digital file(s) for free and print 3D parts from the digital file(s) for your own use.

You cannot :

(X) Sell parts : manufactured from the digital file(s) or any derivative of the digital file(s), no matter how the parts are made, how many parts are made.  This also prohibits you from selling parts made from the Digital file(s) on sites such as eBay, Etsy, FB marketplace or any other location. 

(X) Share the digital file(s) or resell them. 

Liability disclaimer and use:

By downloading the digital file(s) and making a 3D printed derivative object from it, you agree that you're doing it at your own risk and understand the limitations of 3D printed parts.  The digital file(s) are not a product and the design do not give any express or implied warranty that, any product made from the digital file(s), will work or perform in a certain way.