Faravahar Hueforge
Print Profile(1)
Description
Boost Me (for free)
Print at 15% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 200x150mm in size
You may print at higher layer heights below the Min Depth of 0.24mm
The Max Depth is 3mm and the Actual Depth is 1.8mm
Filaments Used:
PLA BambuLab Matte Charcoal Transmission Distance: 0.6
PLA BambuLab Matte Mandarin Orange Transmission Distance: 3
PLA BambuLab Basic Jade White Transmission Distance: 5
PLA PolyLite Beige Transmission Distance: 1.5
This print uses 4 unique filaments
Swap Instructions:
Start with Charcoal
At layer #10 (0.88mm) swap to Mandarin Orange
At layer #11 (0.96mm) swap to Jade White
At layer #18 (1.52mm) swap to Beige for the rest.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (2)