Search models, users, collections, and posts
sherpa_mini_splitter_with_entry_sensor
Remixed by
IP Report
Print Profile(0)
Add the first print profile to earn points
Boost
2
2
0
0
2
0
Released
Description
This is a splitter designed for use with the Sherpa Mini extruder in 3MS setups. It replaces the original “housing_core” and incorporates an entry sensor. The sensor system utilizes a D2F micro switch and a 4mm steel ball for precise operation. By placing the splitter close to the extruder gears, the retraction amount during filament changes can be minimized, eliminating the need for a filament buffer.
This model uses 4 ECAS04, 1 D2F micro switch, and 4 4mm steel balls.
Print Settings
These are the recommended settings.
- Layer height: 0.2mm
- Extrusion width: 0.4mm, forced
- Infill percentage: 40%
- Infill type: grid, gyroid, honeycomb, triangle, or cubic
- Wall count: 4
- Solid top/bottom layers: 5
- Supports: NONE
This remix is based on
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial
Comment & Rating (0)