Search models, users, collections, and posts
Curved Rails for Gravitrax
IP Report
Print Profile(6)
0.2mm layer, 6 walls, 25% infill
58 min
1 plate
Curve, Left & Right + Secured Ends (0,25 mm layer)
5.4 h
3 plates
0.2mm layer, 6 walls, 25% infill
30 min
1 plate
0.2mm layer, 6 walls, 25% infill
39 min
1 plate
Click to see more
Open in Bambu Studio
Boost
690
2712
244
76
2.9 k
2.2 k
Released
Description
While many types of curved rails are available, I found that the types I wanted to use were rarely available and that many had very tight connections, making them difficult for me to use. Therefore, I decided to make my own.
I also made the simplest 120-degree short rail.
It is best to connect the two parts with the original Gravitrax tiles, with the height being flat or with a 0.5cm difference. If there is a 1cm difference, become difficult to handle (although it can be used).
----
My models for Gravitrax on Printable : https://www.printables.com/@Swan_Kikaku_714964/models
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-Share Alike
Comment & Rating (244)