Crochet Blocking Board (250x250)

A 250mm square blocking board for crochet work. Each hole is 12.5mm apart, 5mm in diameter & depth, and there are 18 holes in either direction. The large pegs allow for 100mm of usable length, the small ones are 50mm.

Separator bars are also included for the top of the work. We've found that the size of the pegs makes them susceptible to bending if you're blocking several pieces, so the separators keep the pegs spaced evenly at the top. You can print more separators for midway up if necessary.

The stand holds the board at a 60 degree tilt, is a loose fit at the bottom for easy positioning and removal, and has space to hold 10 pegs in the back. For best results, print with tree supports, default style, and 50 degree threshold angle.

Due to the board's size (almost the full size of the print bed), it is prone to warping, so I would suggest using an enclosure if possible. That said, I've only got an A1, and I've tried making print profiles for the larger machines with enclosures, and it keeps complaining about an exclusion zone, so I've included the individual STL files so you can have a play.

This is my first upload; constructive criticism is welcome.