AR15 Mag sized Battery Case - Free 3D Print Model

Search models, users, collections, and posts

JuniorJP

Hobby & DIY>Sport & Outdoors

IP Report

Print Profile(1)

All

P1S

P1P

A1 mini

X1E

X1 Carbon

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.2mm layer, 2 walls, 15% infill

2.8 h

1 plate

4.7(6)

Open in Bambu Studio

Boost

101

335

281

126

Released

Description

I created this design to carry all batteries I need on the range and in Airsoft

It holds:
4x AA batteries (for chronos and range timers)
4x AAA batteries (for Headsets)
4x 2032 cell batteries (for reddots)
3x CR123A (for lasers, lights and EoTechs)

Its sized to fit into an AR15 magpouch. When using it standalone, theres a recess for 30mm wide velcro bands or rangerbands

I have uploaded new files, since I didnt notice I uploaded the files with my callsign :D
I have uploaded new .3mf and .step files

If you use the .step and design one for other batteries, dm me. That way I can upload it here

I can't upload a print profile right now because I'm using OrcaSlicer and it doesnt allow that profile, however I used the 0.4mm nozzle with the 0.2mm Standard profile, since it's probably used in action (e.g. Airsoft, Larping, hiking, on the range, …) I do recommend printing with the Strength setting though

Comment & Rating (20)

@user_3653013521

I printed this off but for some reason the text for the battery types isn’t sunken. It looked fine when I sliced it yet came out like pictured. I added my own text which came out fine. can you think of any reason why it would do this?

The designer has replied

@JuniorJP

looks like it generated support into the text, you can turn of support or put a support blocker there

@user_3653013521

Thanks will double check tomorrow when I’m back in front of my machine. It didn’t show any supports once sliced for that area but will double check.

@user_3117867363

Printed very well, used my slicing programme to add my name (the blurred part in the picture) the battery types printed really nicely without any support required. Using velcroe one wrap to hold it closed currently but would be keen to see a slot/opening for this to feed through and hold the two halves together while it opens. May also try adding magnets to hold the edges together

@GuessImKevin

Boosted

Really enjoy the print. Is there a way you could extend the bottom and fit a horizontal 18650?

The designer has replied

@JuniorJP

I decided not to include a 18650, because of its size To include it and simultaneously keep the outer size would mean to thin the walls. Since it is used in a harsh environment, I didnt wanna do that I also use two 18650 as NVG counterweight :D Since I shared the Step file, you can design your own