Fortnite Water Sprite

Cute little water sprite from Fortnite chapter 6 season 1, modeled by my friend Vawesome Warped (and posted with his permission).

The model in the STL is about 10cm tall, but you can freely scale it to your liking. The model pictured isa bout 4cm tall printed with a 0.4 nozzle, you could probably go even smaller and retain enough detail. The model is able to stand up straight at that size, though it doesn't take much to topple it.

• Material: PLA or other
• Supports required: Yes
• Build plate adhesion: Brim recommended because of the tiny feet being the only thing touching the plate
• Multicolor: No, but the eyes and element marking can easily be painted. Mine were badly colored in with a fineliner as I don't currently own paint :-)
• Infill: Any percentage should do. I printed mine at 10%
• Resolution: Due to the round shapes, a smaller layer height will get you smoother looking results. I printed mine at 0.08mm.
• Orientation: Best printed upright

Edit: Its sibling, the Fortnite Air Sprite, is now also available, and if you print it at the right size, they hold hands!