UE Megaboom 3 / 4 Wall Mount (double-sided tape)

I needed a wall mount for my UE Megaboom 3 without screws, so I made one with a quite big base plate (10x6cm) to be sure it will stay on the wall. The Megaboom 4 has the same dimensions.

There are two versions, one has a flat side and the other has a .6mm recess to hide the modern 1mm adhesive nano tapes.

I used ABS but it should also work with PLA since the walls are 3.2mm thick. So it should be stable enough.

Printed with 4 walls. No support needed. 

Make sure to clean the wall and the holder (I used IPA) and don't put the Speaker into the holder for 24h after sticking it to the wall.