ESP 32 Case (for USB-C WROOM 32D version)
Print Profile(1)
Description
Saw a good box design for the ESP32, but didn't fit the particular model I had, so I set about designing a similar one, but the dimensions in FreeCAD are all automatically determined by the dimensions of the ESP32 board itself.
There is a hole in the base to allow cables to pass into the underside of the ESP32, and a cutout to allow powering and programming from USB-C.
This particular case is designed for this ESP32 from Amazon: https://www.amazon.co.uk/dp/B0BP1QWVMB
As Bambu don't do a transparent filament for the LED window in the lid, you can either delete the window modifier completely, or change the filament to a transparent filament you own.
The case should be a good tight fit with the currently designed tolerances.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (4)