The Show with the Mouse
Print Profile(3)
Description
Die Sendung mit der Maus
The three main characters from the German series “Die Sendung mit der Maus". This has been running every Sunday morning since 1971 and has over 3000 episodes. However, it is less well known outside of German-speaking countries.
There are 3 print profiles that I have created for the P1S, each with a character. These are then placed on the print bed with the colored side facing down. This is how they should be printed. Only the filaments have to be adapted with similar colors. There are 17 filament changes per print and the prints take about 1 hour.
The dimensions of the finished models are:
| wide (mm) | hight (mm) | thick (mm) | |
| Maus | 100 | 142 | 3 |
| Elefant | 79 | 80 | 3 |
| Ente | 67 | 98 | 3 |
They can be scaled in the x and y axis, but the z axis must remain 3mm.
They are very light and can easily be stuck to any surface with double-sided adhesive tape or similar. The stands that can be seen in the photos are from @3DPrintsThisWeek https://makerworld.com/de/models/681437#profileId-609949
Powered by MakerWorld-Image to Keychain (https://makerworld.com/makerlab/imageToKeychain)
License
Comment & Rating (33)