Search models, users, collections, and posts
Exway 44T Pulley for Cloudwheel Hydro 100mm
IP Report
Print Profile(1)
0.2mm layer, 6 walls, 40% infill
Designer
3.1 h
1 plate
Open in Bambu Studio
Boost
4
14
5
2
15
2
Released
Description
Whoever had Hydrowheel for electric skateboard but didnt have pulley, here it goes. Tested by me, works great. First I had 36T as I used belt for stock wheels 90mm.
- Need to change belt (2x 280mm-HTD5M)
- 12x M3 hex socket head screws with bolts (I dont remember lenght, probably 40mm, sorry for that )
- Need to take off from original pulley bearing or buy 2x new one with same size
Those screws are for strenghten 3d print on z layers. Will not break with them. Print in petg.
Please beware that pulley is still 3d printed and I dont get any responsibility of using them, its on Your own risk! I made it as best I could to gain good part. I was riding on them for about hundred of kilometers, firstly slow to check, later on on top speed 38km/h, heavy braking etc. Rider weight 100kg, so I tested them by my own risk.
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial
Comment & Rating (5)