Search models, users, collections, and posts
Austro Hungarian Rhor Handgrenade Throwable
IP Report
Print Profile(1)
0.2mm layer, 3 walls, 25% infill
Designer
1.8 h
1 plate
Open in Bambu Studio
Boost
17
26
0
1
15
3
Released
Bill of Materials
List other parts
- Cardboard-Pipe x 1: at_least_25_cm_long(10 inches)_diameter_3cm(1inch)
- metal_wire x 1: 3mm
- coffe x 1: for_staining_paper
- Pva-Glue x 1: for_glueing_paper
- Packaging_glossy _paper_thin_cardboard x 1: For_building_the_cap
- twine x 1: for_the_internal_pull_ring
- metalli_2cm_O-Ring_or_washer x 1: for_the_pulling_ring
Description
This WW1 Rhor hand grenade replica is designed for reenactments—harmless, throwable, and worry-free. Sturdy enough for action but easy to remake if lost, it lets you relive history without sweating over casualties... or replacements!I
Materials Needed:
- Cardboard Pipe
- Length: At least 25 cm (10 inches).
- Diameter: Approximately 3 cm (1 inch).
- Bottom Cap
- Use glossy brown shipping paper to fabricate the cap.
- use the glue to keep the cap together
- Markings
- Download the provided image, print it and cut it
- Handle Metal Wire
- Use 3 mm thick metal wire to create the grenade handle.
- Fix the wire in place with a lighter and superglue.
- Internal Pull Mechanism
- Use a metallic washer or O-ring and some twine to fabricate the internal pull mechanism.
- Securely connect the twine to the washer/O-ring with hot glue and attach it inside the grenade.
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-NoDerivatives
Comment & Rating (0)