Geisha_ 4 Color Filament Painting

This model has been carefully designed to look great with 4 colors.

This is an easy to print 4 color Filament painting to add to your décor.

Only filament swaps! No AMS necessary.

This does not need an AMS to print, but it does make it easier.

If you have an AMS, print directly from the provided print profile.

If you don't have an AMS, open and slice in the Bambu Studio or any Slicer app and add pauses at the provided layer heights for filament swaps.

_____________________________

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Swap Instructions:

Start with Black
At layer #11 (0.96mm) swap to Red
At layer #14 (1.2mm) swap to Grey
At layer #16 (1.36mm) swap to Beige or White for the rest.