Simple Rubik's cube - Free 3D Print Model

Search models, users, collections, and posts

wombo12

Toys & Games>Puzzles

IP Report

Print Profile(1)

All

P1S

P1P

X1 Carbon

X1E

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.2mm layer, 2 walls, 15% infill

Designer

4 h

1 plate

3.6(20)

Open in Bambu Studio

Boost

267

551

1.2 k

300

Released

Description

A simple Rubik's cube. It has one center, 2 screws, 8 corners and 12 edges. it's easy to assemble and you shuld be able to figure it out. It takes just under 5 hours to print. Go to Cube store online to order some stickers or use multi color printing to print the pices with color.

Comment & Rating (51)

@jopowuychik

Print Profile

0.2mm layer, 2 walls, 15% infill

terrible design, the cube is very loose and falls apart easily and almost doesnt turn. just trash

The profile uploader has replied

@wombo12

Oh I'm sorry to hear that, have you tightend all the screws properly? If you have then I can go ahead and try to find and fix the issue right away!

(Edited)

@jopowuychik

Replying to @wombo12 :

the screws are tight but the cube just fell apart right now

@wombo12

Replying to @jopowuychik :

hm, I'm currently waiting for replacement parts for my printer but I'll print it once they arrive and try find the problem, have a good day!

(Edited)

@Nosactivated

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill

Prints fine and it does function.

@user_2312079948

The design is very simple, that’s not a problem…. But, supports are straight up garbage. it took me 10 minutes to remove them, and I even broke a part, so I had to print it again. Not recommended. If you still. want to print it, ist the Bambu studio and change the support settings. Printed In Bambu lab petg translucent

(Edited)

@user_1537028636

Print Profile

0.2mm layer, 2 walls, 15% infill

The model feels very lazy. Supports probably weren't thought about, the pieces are prone to breaking, and it's near impossible to get all of the pieces onto the base, especially the last one.

@user_2762729013

that’s a user error maybe you should be more careful

@user_2882120190

give it more infill so it doesn't break so easily

Show original

@catninja

does it work without PLA Basic?

The designer has replied

@catninja

*with

@wombo12

yes it does! As long as the print doesn't have any imprefections that are too large it turns decently

@user_2882120190

@Selah

Do you have to put this together?

@Bentley8775

ya do you

@user_1727460503

of course there’s a 3-D model where you press prepared to print

@user_1727460503

You can see it from there

@mrdogday

can it actually turn?

The designer has replied

@wombo12

Yes, evey time I've printed it, it has worked fine. I have however received feedback that it sometimes does not work and I have no idea why

(Edited)

@LCoolo

Print Profile

0.2mm layer, 2 walls, 15% infill

it was ok but fell apart sadly

@user_3044638094

Try PLA CF from Bambu Lab, that is more stable, or use PETG. For me, it worked well with PLA CF

Show original

@user_1727460503

who said it is easy to assemble

The designer has replied

@wombo12

yea it can be a little tricky😅

@PENCE123

Print Profile

0.2mm layer, 2 walls, 15% infill

supports are bad

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Related Models

Cube

repair3D

16.1 k

507

TEST-CUBE

BUY嘉筆記

17.4 k

341

Fidget Cube toy

Mr_Andre

24.2 k

5.4 k

Parametric Sectioned Cube Fidget

Travy

16.6 k

2.8 k