Stoppo Barrier Stand/Crowd Control System Cap
Print Profile(2)
Description
Recently we got some demarcation stands (or in german: Angrenzungsständer) from the brand “Stoppo” out of the trash. They are used to guide people or to demarcate something. We got them in good condition but some of the metallic caps with the “Stoppo” Logo on top of the stand fell off. So I designed these caps as replacement.
The caps snap into the hole that is under the original metallic cap. The diameter of the cap is 54.5 mm.
I do not know the exact model of my Stoppo, but here is a picture:
I originally designed this replacement cap for an event of our local choral society with a clef as logo. But I also provide here a blank one.
More Info:
- If the cap on your Stoppo is still there, you can take the top of by unscrewing the 4 screws on the side of the plastic holder, that holds the metallic plate. Then I used a big screwdriver and stuck it throuch the hole with a bit of force, to press the original cap out.
- The top of the replacement cap is only 2 layers thick. So be carefull to not damage it.
- If you want to remove the replacement cap, you can use a Scraper to lift it up and carefully pull it out with some mild force. Or you can simple again unscrew te top like explained above
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)