Mike Wazowski from "Monster & Co"

Mike Wazowski from "Monster & Co"

Famous character Mike Wazowski, ready for 3D printing and to keep you company on your desk or in your child's bedroom.
The printing profile is in 2 plates, containing the model already colored for AMS and the single-color model, it's up to you to choose which one to print.

On X1C the colored model takes 11h and 45m to print, while the single-color one takes 1h and 40m.
So you can choose whether to do a test first and then print the colored one or if you don't have AMS you can still have fun printing and coloring with acrylic colors.

The supports are tree-shaped and easy to remove, but always pay attention when you remove them as they are close to the game and arms which are delicate (I say this for the less experienced but as you can see in the photos the models remain clean).

Enjoy

note: If you look at the bottom, it does not remain perfectly smooth, this is wanted due to the increase in space for the removal of the supports and to make their removal easier for everyone.