Fly tying bobbin holder - Free 3D Print Model

Search models, users, collections, and posts

Sam

Hobby & DIY>Sport & Outdoors

IP Report

Print Profile(3)

All

X1 Carbon

P1S

P1P

X1E

A1 mini

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.12mm layer, 2 walls, 20% infill

Designer

36 min

1 plate

4.8(32)

0.12mm layer, 2 walls, 20% infill

Designer

8 min

1 plate

5.0(2)

0.12mm layer, 2 walls, 15% infill

1.2 h

1 plate

5.0(2)

Open in Bambu Studio

Boost

224

621

691

473

Released

Bill of Materials

List other parts

Cotton swab x 1:

Description

A bobbin holder for your fly fishing flies, easy to print and easy to make !

What you need :

Glue
One cotton swab with an hollow plastic rod (outer diameter of 3 mm max)

1.Print all the parts at 0.1 resolution ( because of the screwed parts which require a great printing precision.).
2.Remove the cotton from a cotton swab and cut both ends to obtain a rod about 55 mm long.
3.Glue the cotton swab rod into the object named "tube".
4.Glue the object named "Loft" with the object named "Bobin holder".
5.Glue the object named "Tube" with the objet named "Bobin holder".
6.Enjoy !

EDIT : I've added a washer (object named “spacer”) if you have short coils. Just print it (profile available) and add it between the coil and the disc before the screw.

No supports required !

Boost Me (for free)

Comment & Rating (58)

@user_2710109689

Boosted

Hello, very easy to print, excellent model, I'm going to try it now to tie a fly, thank you very much for the file!!!

The designer has replied

Show original

@Sam001

Glad to see that everything went well and that you like the model! Thank you very much for your comment and for the boost!

Show original

@Spiro44

Good model thanks. No glue needed,screw good, tight tight fit using esun PLA+ on A1 Mini, défaut profil Also using good filament the bore is smooth, no need for qtip!

(Edited)

The designer has replied

@Sam001

Thank you for your good evaluation!

@sebastiaolopes

Print Profile

0.12mm layer, 2 walls, 20% infill

Muito bom

The profile uploader has replied

@Sam001

Thank you for the reviewing and for let us see your make !

@luca_1983

Print Profile

0.12mm layer, 2 walls, 20% infill

Perfect I even printed three for a friend and gave them to him because I don't fly fish

The profile uploader has replied

Show original

@Sam001

Thank you so much, enjoy !

@wiseshanks

Print Profile

0.12mm layer, 2 walls, 20% infill

Very simple and extremely useful for tying jigs! I'm going to be making lots of these! Thanks!

(Edited)

The profile uploader has replied

@Sam001

Thank you so much !

@iamzealotwang

Thank you. Excellent model. One minor issue: the cylinder length isn't quite right for my spool size, so I made a few modifications (I've uploaded the print profile).

Show original

@user_2346820470

Print Profile

0.12mm layer, 2 walls, 20% infill

Easy to print and highly useful

Show original

@user_3579684300

Boosted

These are brilliant, thank you for designing and sharing these. For a long time I've wanted to have a selection of fancy bobbins but when it comes to paying for them I always back out and get the brass pinchy claw ones. I printed these out of ABS and they word extremely well. I don't know what the moaner up there is whinging about these are tremendous!

The designer has replied

@Sam001

Thank you so much for your kind and encouraging comment! Enjoy ;)

@user_2710109689

Boosted

hello I didn't understand this point: 1. Print all parts at a resolution of 0.1 (due to the threaded parts requiring high printing precision). I have a Bambu Lab A1. Should I increase the size percentage?

The designer has replied

Show original

@Sam001

Hello, These comments are for people using .STL files without going through the already prepared print profiles. As a Bambulab A1 user, you just need to click on prepare print on your phone or on makerworld if you are on your pc, choose the first print profile containing all the parts and everything should go smoothly, you don't have to change the size of the objects. You have nothing more to do Was that the meaning of your question?

Show original

@user_2710109689

Boosted

Replying to @Sam001 :

ok thank you very much for answering... I'm going to print your file now

Show original

@luca_1983

Print Profile

0.12mm layer, 2 walls, 20% infill

Little needs to be said, they are simply spacers, therefore a perfect print

The profile uploader has replied

Show original

@Sam001

Thank you for your comment 🙏

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.