Katana Stand 1/12
Print Profile(2)
Description
🇺🇸: I designed this stand to hold the katanas from my figures. It's made to 1:12 scale — meaning small katanas roughly 11 cm (about 4.3 in) long! To keep the details crisp, I'd recommend printing it at a 0.10 mm layer height in PLA or HF PETG. Normally, if your printer and filament are properly calibrated, you won't need any supports.
My Instagram/TikTok/YouTube : @StudioJamesCao
I designed this stand to hold the katanas from my figures. It is intended for 1:12 scale, meaning for small katanas approximately 11 cm long! To maintain fine details, I recommend printing it at a 0.10mm layer height with PLA or HF PETG. Normally, if your printer and filament are well-calibrated, you won't need any supports.
My Instagram/TikTok/YouTube: @StudioJamesCao
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including, but not limited to, publishing derivative works outside the Makerworld platform or hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money or collect fees. Subject to the above restrictions, derivative works may be published only within the Makerworld platform, and all such derivative works must be licensed under the same SDFL‑C license, without modification or additional terms. You may download the digital versions of this object, 3D print it, and display images, videos, or usage demonstrations of 3D printed versions of the object on personal social media platforms or Makerworld official channels, provided that no digital versions of the object are shared or distributed.
Comment & Rating (18)