X-Wing Under Fire from Tie Fighter Hueforge
Print Profile(2)
Description
Project: xwingunderfirefromtie.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 172.64x230mm in size
You may print at higher layer heights below the Min Depth of 0.88mm
The Max Depth is 3mm and the Actual Depth is 2.7mm
Filaments Used:
PLA PolyLite Black Transmission Distance: 0.3
PLA BambuLab Basic BambuLab Green Transmission Distance: 2
PLA PolyLite Lime Green Transmission Distance: 3.5
PLA+ Polyterra Red Transmission Distance: 3.5
PLA PolyTerra Sunrise Orange Transmission Distance: 2
PLA Panchroma Satin White Transmission Distance: 3.8
This print uses 6 unique filaments
Swap Instructions:
Start with Black
At layer #12 (1.04mm) swap to BambuLab Green
At layer #18 (1.52mm) swap to Lime Green
At layer #20 (1.68mm) swap to Red
At layer #25 (2.08mm) swap to Sunrise Orange
At layer #28 (2.32mm) swap to Satin White for the rest.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (1)