Search models, users, collections, and posts
Print Profile(2)
0.16mm layer, 2 walls, 10% infill
Designer
50 min
1 plate
0.16mm layer, 2 walls, 10% infill
Designer
56 min
1 plate
Open in Bambu Studio
Boost
77
186
13
2
145
79
Released
Description
WALLT
Ultralight Wallet - under 20g , no moving parts.
2 versions: 4 cards / 9 cards
I designed this wallet to reduce weight as my previous slim wallet is quite heavy.
Prints with just under 20g of filament with no supports to make it super easy to print and very lightweight.
Also prints flat so you can take advantage of textured plates to tweak your finish.
There are no moving parts, the cards are held in from the top by a lip making them click into place when inserted.
Requires 4 M3x5mm screws.
Assembly:
- Slide the top plate onto the bottom, the lip where the screw holes are should help the alignment.
- Insert the M3 screws into place.
- Done!
Hope you enjoy it, let me know what you think if you print it!
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-Share Alike
Comment & Rating (13)