Dewalt saw table dust port 90 degree adapter - Free 3D Print Model

Search models, users, collections, and posts

Matthijs

Tools>Machine Tools

IP Report

Print Profile(1)

All

P1S

P1P

X1 Carbon

X1E

A1 mini

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.2mm layer, 2 walls, 15% infill

Designer

3.4 h

1 plate

4.6(9)

Open in Bambu Studio

Boost

149

522

435

255

Released

Description

Dust Extraction Adapter for DeWalt Table Saw to Festool Hose with 90° Bend

This adapter is designed to connect the dust extraction port of your DeWalt table saw to a Festool vacuum hose with a Cleantec D27/37 connector. The adapter includes a 90-degree bend so it can be used in tight spaces.

The end of the adapter that connects to the table saw tapers from 57 mm to 60 mm to make sure it's a tight fit.

It might fit other brands of table saw just check the diameter of your dust extraction port.

Note: The support can be a bit tricky to remove i would recommend using some pliers and sanding paper to clean the last bit up.

dewalt

Festool

festool

festool 27 36mm hose ends

Adapter

dustport

dust adapter

Comment & Rating (18)

@user_637568121

its support cannot be withdrawn, so i throw it to rubbish.

@user_3948295887

Modify the Z distance in your slicer, increase it by 0.05 to 0.08 mm, even more if you want to know the exact value, print a support test, https://makerworld.com/en/models/2050384-support-test-tree-and-normal-support-test?from=search#profileId-2212827

Show original

@user_1206566665

I recommend printing with the largest diameter tube in contact with the bed This minimizes support structures and reduces the need for extensive sanding as the vacuum tube only contacts the interior

The designer has replied

Show original

@3dMatthy

i made it this way because the connector for the festool hose needs to be kind of precise so this way it ensures it fits.

@user_1206566665

Replying to @3dMatthy :

I hadn't considered that detail Thank you for the feedback

Show original

@user_3659643050

With that amount of pipe reduction you could start the bend inside of the saw port and have a really tight fit. Making room for a foldable outfeed table

(Edited)

The designer has replied