Glowing Candyman
Print Profile(1)
Description
For commercial rights please join our patreon.
https://www.patreon.com/c/E3dPrinting
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.24mm
The Model is 200x200mm in size
You may print at higher layer heights below the Min Depth of 0.4mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm
Filaments Used:
PLA+ Numakers Pitch Black Transmission Distance: 1.6
PLA+ Glow of Your Choice
This print uses 2 unique filaments
Swap Instructions:
Start with Pitch Black
At layer #15 (1.36mm) swap to Pure White for the rest
Boost Me (for free)
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)