Snap on Gridfinity bin handle

Gridfinity bin handle for 1 and size 2 bins
 

Snaps to place with small lip. 
 

Easy to swap to another bin when needed.

Print plates have both sizes 1 and 2, just choose if you have either 4mm lip “ecobin” or 7.5mm lip “hollow” on your Gridfinity bin to have the correct snap fit, and the material you will use PETG or PLA from the provided print profiles. 

If you are not sure which one you have it is the lip that the bins rest on top of each other, or just take the 8mm one to be sure it will fit. 

While the handle is my design, the Gridfinity platform is created by Zack Freedman!

You can find the drawers in the images here and here.

As always, happy printing! ☺

Print settings for PETG
0.2mm layer height
Avoid crossing wall on
No z hop
support tree slim with 0.35mm Z height, 3 top interface layers, and top interface spacing 0.5
10% gyroid infill
wall generator Arachne

PLA profile
0.2mm layer height
Avoid crossing wall on
No z hop
support tree slim with 0.35mm Z height, 3 top interface layers, and top interface spacing 0.5
5% cubic infill
wall generator Arachne