virgo
Print Profile(1)
Description
Project: virgo.hfp
Print at 100% infill with a layer height of 0.08 mm and a base layer of 0.16 mm
The model has a size of 176x176 mm.
You can print at higher layer heights below the minimum depth of 0.48 mm.
The maximum depth is 2.2 mm and the actual depth is 1.8 mm
Filaments used:
PLA PolyLite White Transmission distance: 5
PLA PolyLite Black Transmission distance: 0.3
Generic Violet PLA Transmission distance: 5
Bambu Lab Matte Ice Blue PLA Transmission distance: 3.5
This print uses 4 unique filaments.
Swap instructions:
Start with White
At layer 5 (0.48 mm), swap to Black
At layer 8 (0.72 mm), swap to Violet
At layer 16 (1.36 mm), swap to White
WARNING: this slider is on the same layer as the next slider
At layer 21 (1.76 mm), swap to Ice Blue for the rest.
Boost Me (for free)
If you like my models, help me with a boost
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (3)