HexHolder

Holder for ¼ inch hex bits. Basically it holds everything that goes in a impact driver. Meant to organize bits, hex-drills, etc. What you're holding should have an indent like shown in the last 2 pictures. If it has an indent like that, the holder provides a positive hold, meaning the item will not fall out.

Available with space for 2, 3, 4 or 5 tools, with an individual spacing of 10, 15, 20 or 25mm on center. If you need a different amount or different spacing, leave me a comment and I'll get back to you ASAP.

Fusion360

If you're capable with Fusion360, you can also use the included file. The amount of holders and the spacing can be adjusted in the user parameters.

Adding text

If you're capable with Fusion360, open “Sketch4” in the “Holder” component (last sketch on the timeline). Adjust the text there. You shouldn't need to move it, the text should be centered. You may need to change the size of the text, I noticed that a letter P will stick out too low.

If you're not capable with Fusion360, you can add text in Bambu Studio. It's not as nice, but it does work. I'd recommend making your text 1 or 2 layer heights tall.

Printing

Open the .3mf file and remove the versions you don't want. To get more of one version, you can clone it. It's also an option to print the .stl files.

PS. I only printed 2 holders to take pictures of, because I already have mine done and printing things I'm not gonna use is wasteful.