UMarts3D

cover

IMG_4967.jpg

plate_1.png

plate_2.png

plate_3.png

chameko小廢物電波塔

IMG_1666.webp

I further split the original file so that the model could be printed more quickly. Some glue was needed to fix it.Thank you to the original author for allowing the modified archive to be uploaded. This is a great model!!

[32cm high]0.2mm layer, 2 walls, 10% infill

plate_4.png

ChibiCheese

20250221_080906.jpg

This is a slight mod to the original design that:  - adds one extra cut to reduce the need for support - cleans up the center seam to make it less visible - adds variable layer height for a better top surface finish on the top tiers&nbsp;This does require more careful gluing/aligning of the extra cut, because there are no guide posts, so only use this is you are willing to assemble with care!

0.2mm layer, 2 walls, 10% infill: Less Support, Cleaner Seam

Cooper's Creations

tree.jpg

2024-08-31_54e5236406403

_(1).2024-08-31_4a7a697f3be6c

_(2).2024-08-31_5509ca972d1fa

I found that 15% infill was waaay to high for such a large model like this, and 0.2 mm layer height was too small. So I sliced this; a speed version.

0.3mm layer, 2 walls, 5% infill

Display Stand Tree

ASIA

Print Profile(3)

Description

Comment & Rating (234)

License

Related Models