Scoop no support - Free 3D Print Model

Search models, users, collections, and posts

SabreDesign

Tools>Other Tools

IP Report

Print Profile(6)

All

P1S

P1P

X1 Carbon

X1E

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

A1 mini

0.2mm layer

Designer

4.7 h

1 plate

5.0(1.1 k)

0.24mm layer

Designer

4.4 h

1 plate

5.0(237)

0.16mm layer

Designer

5.7 h

1 plate

5.0(75)

100% scale (A1 Mini) 0.2mm layer, 2 walls, 15% infill

5.5 h

1 plate

5.0(101)

Click to see more

Open in Bambu Studio

Boost

5297

14599

1781

1.5 k

17.1 k

11.4 k

Released

Description

No supports needed. Scoop with curve to ensure material does not fall back out when pulling the scoop out. Inner volume of scoop is 1000ml. Can be scaled to your liking, standard inner size is 74 x 74 mm. Angled opening part of the scoop should be placed on the printbed for optimal print quality.

If you want to support me or get commercial licenses you can join a patreon membership: https://www.patreon.com/SabreDesign
For one time support you can also buy me a coffe here: https://buymeacoffee.com/sabredesign

Boost Me (for free)

Check out more of my designs below and on my profile:

Comment & Rating (1781)

@iceKream

Print Profile

0.2mm layer

Printed at 30% scale to make a mini scoop for my silica beads. 😀 Bambu basic PLA green

@Millennium3D

that's exactly what I'm thinking of doing 😁 thanks for sharing the photos ☺️

(Edited)

@iceKream

Replying to @Millennium3D :

You're welcome. Maybe a little bit bigger would have helped.

(Edited)

@3HFamily

how do you adjust scale?

@Jasonuht

Print Profile

0.2mm layer

Had to swap colors mid print, perfect for dog food.

@SouthernWolff

How much food does your dog eat!? Lol

(Edited)

@JimmyMachine

I think the color switch looks really cool

(Edited)

@EmeraldCraft

looks really cool! do you know at what layer you made the switch to achieve this effect?

@CHurc

Print Profile

0.2mm layer

This turned out great. I needed a larger print to test out some rainbow PLA. Fanciest dog food scoop I’ve ever seen. 🌈

@3D_PrintsIL

Print Profile

0.16mm layer

Printed to use as a scoop for snow salt at work. we’ve been using an old torn up red solo cup for years… 😂 Everyone will be shocked when I bring this BEAST of a scooper in! This thing is SOLID! and printed fantastically.

@boozers

That's the same reason for my print! Show is coming. :)

@CBow12

Boosted

did you change the size at all and did you use pla? I to have a red solo cup i want to replace 😄

@misfitz3dz

do you know what size we could print this for say one or two cup volume?

@Zekey3

this guy asks the right questions! also very cool print thank you for sharing!

@user_1483506038

If the original is 1000ml and 1 cup is 236.588ml, I would say shrink the entire print down to 23.66% of the original size for one cup. 47.32% for two cups. But please, check my math.

@user_841497604

Replying to @user_1483506038 :

Sorry but your maths are wrong. Try 63% for 1 metric cup and 80% for 2 metric cups

@mr_feeny

Print Profile

0.2mm layer

wonderful model, resized to 75% scale and a line added at the 1 cup measurement

@IdoKaplan

could you share the file?

@mr_feeny

Replying to @IdoKaplan :

I uploaded it under the profiles.

(Edited)

@user_690515903

That's pretty neat. Would you happen to know how much fits in the scoop to the top? Thanks.

@moocifer

Print Profile

0.2mm layer

Printed really nicely! I ran out of white filament toward the end and the orange/red filament I used to finish the scoop looks awesome! Thank you for this model!