Starry Night

Project: Stary Night.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 240x195.84mm in size
You may print at higher layer heights below the Min Depth of 0.8mm
The Max Depth is 3.8mm and the Actual Depth is 3.7mm

Filaments Used:
PLA Paramount 3D Hannibal Red Transmission Distance: 3
PLA BambuLab Tough Pine Green Transmission Distance: 1.5
PLA BambuLab Matte Dark Blue Transmission Distance: 1
PLA BambuLab Basic Blue Transmission Distance: 4
PLA BambuLab Matte Ice Blue Transmission Distance: 3.5
PLA BambuLab Basic Yellow Transmission Distance: 6
This print uses 6 unique filaments

Swap Instructions:
Start with Hannibal Red
At layer #12 (1.04mm) swap to Pine Green
At layer #13 (1.12mm) swap to Dark Blue
At layer #21 (1.76mm) swap to Blue
At layer #32 (2.64mm) swap to Ice Blue
At layer #38 (3.12mm) swap to Yellow for the rest.