Light curing printer internal lighting

！*Note: It is necessary that your COB light strip will not cause a curing reaction to the photosensitive resin. My method is to put a few drops of resin on the tray and use a COB light strip to illuminate it at its highest brightness for 10 hours to see if there are any changes.

！*注：您的COB灯带必须不会对感光树脂产生固化反应。我的方法是在托盘上滴几滴树脂，用COB灯带以最高亮度照射10个小时，观察有没有变化。

12V COB light strip*100mm

PWM dimming module *1
DC-022 5.5*2.1mm *1
Wire*2
M3 double-sided tape
FDM ABS consumables
12v-2A or 1A power adapter (3C)

---

12V COB灯条*100mm长

PWM调光模块*1
DC-022 5.5*2.1mm *1
电线*2
M3双面胶带
FDM ABS 耗材
国内220转12v-2A或1A 3C认证电源适配器