Toughbuilt StackTech Compatable Connector
Print Profile(2)
Bill of Materials
Description
These connectors allow you to make your own parts to connect to the top of your Toughbuilt StackTech units. Once attached to the bottom of something, you can simply push the spring-loaded connector forward, lower the fixed connector on the other end, and then allow the fixed connector to spring back into the slot. There are two sets of connectors – one which is bolt-on and the other screw-on. The moveable tenon and cover are common to both versions. Two 5 mm diameter springs, about 30 mm long, are required for each moveable connector along with M3 x 16mm bolts and nuts
I designed a B&D Workmate-inspired work surface which now attaches to the top of my wheeled toolbox. For this I used the bolt-on connectors. I've also added the connectors to a flat piece of board with a replaceable work surface on top – I used the screw-on connectors for this.
Documentation (1)
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (13)