Flashpoint Stand - Individual Section
Print Profile(9)
Bill of Materials
Description
Hex shaped modular model display system.
Designed for Flashpoint models but will work for any circle base models with either 25mm, 27mm, 32mm or 40mm bases.
Included heights are 10mm, 15mm, 20mm, 25mm, 30mm, 40mm, 50mm, 60mm, 70mm, 80mm, 90mm, 100m and a Riser file which is just a Hex with no hole which can have it's height adjusted in Bambu studio and then glue to the base of the above if you need higher than 100mm.
Bonus, Riser could be used for terrain.
Note: The each print profile has 12 plates, each with 1 of each height of stand on it, the total print time and filament used is all 12 plates, in case anyone saw the time to print and had to take a double take.
2 Versions
Version 1 - Designed for models with Warmag magnets stuck on the bottom
This version has a 5x2mm space to add a magnet for extra hold on the models and a 5mm lip so that Flashpoint models with Warmag magnets on their base will have the top of their base align with the top of the Hex.
Version 2 - Designed for models without any extra base height from magnets
This version has a 3.5mm lip so that Flashpoint models with nothing added under their base will have the top of their base align with the top of the Hex.
Image included for the measurement of combining Hex's into a single joined stand pre-printing. Measuring from the bottom left corner of the grey Hex in the photo, position I am referring to can be seen from the circle in the corner of the L shaped ruler in the picture.
In word, the main Hex is 50x43.3mm (WxD). Adding the Orange Hex in the picture is Width of the original Hex is added 37.5mm (or add a - for the Red one on the left) and 21.65mm Depth. You then add 37.5mm to this for each one layer further in Width and 21.65mm for each Layer further in Depth.
I also have some pre-made display stands based on how units have been released which you can find linked below and then just print out these individual Hexes to fill in any gaps or to add extra miniatures to the stand.
Spartan 4 man Fireteam Stands (or Elites)
https://makerworld.com/en/models/2943079-flashpoint-fireteam-stand-spartan-magbase#profileId-3296332
ODST Stand Set
https://makerworld.com/en/models/2943080-flashpoint-fireteam-stand-odst-magbase#profileId-3296333
Elite Stand Set (6 man and 5man variants)
https://makerworld.com/en/models/2943102-flashpoint-fireteam-stand-elites-magbase#profileId-3296362
Brute Stand Set
https://makerworld.com/en/models/2943105-flashpoint-fireteam-stand-brutes-magbase#profileId-3296366
I'm quite new to 3D Printing, so if anyone has improvement on the printing settings I would appreciate the advice, but with the current settings the stands have printed out well on my A1.
For dimensions of the stand based on how many layers of Hexes
| Hex Layers | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 | 14 |
| Width (mm) | 50 | 87.5 | 125 | 162.5 | 200 | 237.5 | 275 | 312.5 | 350 | 387.5 | 425 | 462.5 | 500 | 537.5 |
| Depth (mm) | 43.3 | 64.95 | 86.6 | 108.25 | 129.9 | 151.55 | 173.2 | 194.85 | 216.5 | 238.15 | 259.8 | 281.45 | 303.1 | 324.75 |
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including, but not limited to, publishing derivative works outside the Makerworld platform or hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money or collect fees. Subject to the above restrictions, derivative works may be published only within the Makerworld platform, and all such derivative works must be licensed under the same SDFL‑C license, without modification or additional terms. You may download the digital versions of this object, 3D print it, and display images, videos, or usage demonstrations of 3D printed versions of the object on personal social media platforms or Makerworld official channels, provided that no digital versions of the object are shared or distributed.
Comment & Rating (3)