Print Profile(1)
Description
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 200x200mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.4mm and the Actual Thickness is 2.32mm
PLA BambuLab Matte Charcoal Transmission Distance: 0.6
PLA BambuLab Basic Red Transmission Distance: 4
PLA BambuLab Basic Pumpkin Orange Transmission Distance: 5.5
PLA BambuLab Basic Yellow Transmission Distance: 6
PLA BambuLab Basic Hot Pink Transmission Distance: 3.9
PLA BambuLab Matte Ivory White Transmission Distance: 3.5
This print uses 6 unique filaments
Swap Instructions:
Start with Charcoal
At layer #6 (0.56mm) swap to Red
At layer #11 (0.96mm) swap to Pumpkin Orange
At layer #12 (1.04mm) swap to Yellow
At layer #19 (1.6mm) swap to Hot Pink
At layer #23 (1.92mm) swap to Ivory White for the rest.like
Boost Me (for free)
A like a comment a boost all helps thank you
Boost Me (for free)
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)